| 5050 |
1-60 Twist Drill and Drill Rod
Gage |
Gages drill sizes 1 thru 60. Each
hole marked with number size and decimal equivalent
of drill. |
$19.43 |
| 5051 |
1-60 Twist Drill and Machine Screw
Tap Gage |
Tells at a glance the correct
size tap drill for machine screw tap in "NF" National
Fine or "NC" National Coarse thread series.
Shows the correct body size drill to use .60 sizes
shown with number and decimal equivalent of drill
at each hole. |
$19.43 |
| 5052 |
1/16" to 1/2" Fractional
Size Drill Gage |
Gage has 29 measuring holes for
determining twist drill sizes from 1/16" to
1/2" in 1/64" increments. Shows drill
sizes in inches and decimal equivalents. |
$18.64 |
| 5053 |
A to Z Alphabet Drill Gage |
Used to select or check drill
sizes from "A" to "Z". Each
gage hole is marked by letter and its decimal equivalent
from .234 inch diameter through .413 inch diameter. |
$18.64 |
| 5054 |
61-80 Twist Drill and Drill Rod
Gage |
Used to gage and select the correct
twist drill and steel drill rod in the small size
range from 61 through 80. Each hole shows the size
number and the corresponding decimal equivalent. |
$12.08 |
| 5075 |
1.0 to 5.9 mm Metric Twist Drill
and Drill Rod Gage |
Gages 57 sizes from 1.0 to 5.9
mm. Gage shows metric sizes with decimal equivalents. |
$19.43 |
| 5076 |
1.5 to 12.5 mm Metric Twist Drill
and Drill Rod Gage |
Gages 30 sizes from 1.5 to 12.5
mm. Gage shows metric sizes with decimal equivalents. |
$19.43 |
